Delivery time 1 to 2 weekdays     Protection film free of shipping costs     14-day money back guarantee     No registration required     Credit cards & PayPal payment
Product selection


Our 3M films consist of 2 parts, which are placed one upon the other in 2 layers. On the top the protective film and below the release paper.

Instruction DISAGU® and Ultra Clear screen protector film:



Preparation:
Have an creditcard (or similar) and a handkerchief (or similar) at hand before mounting.

1. Cleaning
Clean the display thoroughly beforehand (remove dirt and dust).

2. Detaching 1/3 of the protective display
Detach approximately 1/3 of the transparent protective display film from the release paper. Do not touch the adhesive side!

3. Folding the release paper
Fold the release paper, to which the film was attached, backwards.

4. Aligning the protective film
Hold the beginning of the detached film properly aligned on the appropriate location of your device and press on lightly, so that it cannot slip anymore.

5. Attaching the protective film
Apply the creditcard wrapped in the handkerchief to the beginning of the adhered film. Detach the folded release paper slowly and continuously from the film and simultaneously press the film firmly on with the creditcard.

6. Rubbing the protective display film on
Now use the EC-card (or fingers) to carefully and firmly rub the protective display film on from the centre outwards.

Important note !!!
If a milky lustre is visible after mounting: DO NOT REMOVE THE FILM OVERHASTILY !!! It can take up to 36 hours to achieve full clarity according to the respective display surface.



Instruction Vikuiti™ screen protector film:



1. At first please lay the protection sheet onto your display and assess the desired place before putting it on.

2. Now thoroughly and dryly remove all soil and dust in order that none of it is underneath the sheeting when being applied.

3. Now pull off 1/3 of the transfer foil with help of the flap on the bottom and fold it over.

4. Affix the display protection sheet to the desired place and press it on slightly.

5. Now completely pull off the remaining transfer foil and thereby press on the display protection sheet firmly bit by bit.

6. Congratulations! You have successfully applied your display protection foil and now your display is safe from undesired scratches.

Important tip !!!
Small airlocks (no dust or lint embedment!) mostly disappear by themselves after 2-3 days.

Back